Grass Valley HD Wireless - Manual (Page 81)

HD Wireless User’s Guide (v6.2) 81
Chapter 8 - Exchanging the RF module
Chapter 8
Exchanging the RF module
In some situations you may choose to use a different frequency band. To use a different band,
you need to exchange the right side cover (= camera RF module) of the wireless camera
adapter.
Caution
Exchange of the camera RF Module must only be performed by qualified personnel.
Choose the frequency module for your frequency band:
– LDK 5466/20: Camera RF module 2.0 - 2.2 GHz
– LDK 5466/22: Camera RF module 2.2 - 2.4 GHz
– LDK 5466/25: Camera RF module 2.5 - 2.7 GHz
To install the module you need to exchange the entire right side cover of the wireless camera
adapter as follows:
Caution
Do not immediately remove the panel from the adapter after unscrewing; it is connected by
two cables to the adapter.
1. Unscrew the five screws securing the right side cover of the adapter and carefully open
the unit.
2. Disconnect the coaxial cable from the adapter side and the flat cable from the RF module
side.
3. Connect the cables between the new RF module and the adapter.