Grass Valley HD Wireless - Manual (Page 52)

52 HD Wireless User’s Guide (v6.2)
Chapter 4 - Setting up
HORIZONTAL PHASE (not used)
CAMERA
ON
Normally and permanently ON, this light indicates that the WCU is powered. This indicator
flashes to indicate excessive consumption at the WCU.
OFF
This indicator lights when the AMU is not drawing power. This indicator flashes to indicate
that the AMU power consumption is excessively low (< 26 W).
CABLE OPEN
This normally OFF indicator lights if there is no Digital Triax Rack in the WCU.
ON AIR
When ON, this light indicates that the camera signal is on air (ON AIR1).
MAINS
The equipment master on/off switch:
«I»: The equipment is operating.
«O»: The equipment is not operating.
13
13