Grass Valley HD Wireless - Manual (Page 83)

HD Wireless User’s Guide (v6.2) 83
Chapter 9 - Installing the Video booster
Chapter 9
Installing the Video booster
9.1 Introduction
The Video Booster for wireless cameras is a highly linear RF amplifier designed to be used as
an accessory to the HD Wireless Camera Adapter. The Video Booster operates over a range
from 2,000 to 2,700 MHz and delivers up to 500 mW of conducted power.
The Video booster is mounted between the back panel of the Wireless Camera Adapter and
the battery. It can be delivered for two types of battery systems: IDX (LDK5455/60) or Anton
Bauer (LDK5455/50) to be specified when ordered.
9.1.1 Package contents
• Video RF booster unit (equipped with either a IDX or Anton Bauer battery interface).
• RF coaxial cable (with SMA right-angled connector to SMA right-angled connector).
• Flexible antennas (with N-type male connector). Use only the antenna that matches your
RF module:
– LDK 5457/20 for 2.0 - 2.2 GHz range;
– LDK 5457/22 for 2.2 - 2.4 GHz range;
– LDK 5457/25 for 2.5 - 2.7 GHz range.
LDK 5455 Video
Booster unit
RF coaxial cable
Flexible antenna