9 cvbs output connectors (2x), 10 sdi output connectors 1 + 2, 11 sdi output connector 3 – Grass Valley HD Wireless User Manual
Page 73
HD Wireless User’s Guide (v6.2)
73
Chapter 6 - Connectors
6.3.9 CVBS output connectors (2x)
6.3.10 SDI output connectors 1 + 2
6.3.11 SDI output connector 3
These two BNC connectors provide an analog 1 Vpp CVBS output signal for
monitoring purposes. The menu text is superimposed on this signal when the
menu is switched on.
BNC connectors
These two BNC connectors provide a 0.8 Vpp SDI (SD or HD) output video
signal according to SMPTE 259M-C or SMPTE 292M.
When used in SD mode, the menu text (OSD) is superimposed on these signals
when the menu is switched on. However it is possible to switch off
automatically the OSD when Tally signal is active. Setting in WCU menu:
MONITORING > MENU > MENU ON AIR
BNC connectors
This BNC connector provides a 0.8 Vpp SDI (SD or HD) output video signal
according to SMPTE 259M-C or SMPTE 292M.
When used in SD mode, the menu text (OSD) is superimposed on these signals
when the menu is switched on. However it is possible to switch off
automatically the OSD when Tally signal is active. Setting in WCU menu:
MONITORING > MENU > MENU ON AIR.
BNC connector