H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 91)

85
Figure 88 Add an IP address group
Table 86 Configuration items
Item Description
Name
Required
Type a name for the IP address group.
Valid characters for the name: letters, digits, underscores (_), periods (.), slashes (/),
and hyphens (-), where underscores can’t appear at the beginning or end of the name.
IMPORTANT:
The name must be unique in the system. It cannot be the same as the name of an existing
host address, address range, subnet address, or IP address group.
Description
Optional
Type some descriptive information for the IP address group.
Valid characters for the description: letters, digits, blank spaces, colons (:),
underscores (_), commas (,), periods (.), exclamatory marks (!), and hyphens (-), where
underscores can’t appear at the beginning or end of the name.
Member
Required
Add members to the IP address group.
• Available members are listed in the left box, including all added IP addresses. The
right box lists the members to be added to the IP address group.
• You can select one or more members in the left box and then click Add>> to add
them to the right box. You can also select one or more members in the right box and
click <
To delete IP address groups, select them and click Delete on the IP address group management page.
Return to
IP address management functions .