H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 85)

79
Figure 82 Add a host address
Table 80 Configuration items
Item Description
Name
Required
Type a name for the host address.
Valid characters for the name: letters, digits, underscores (_), periods (.),
slashes (/), and hyphens (-), where underscores can’t appear at the beginning
or end of the name.
IMPORTANT:
The name must be unique in the system. It cannot be the same as the name of an
existing host address, address range, subnet address, or IP address group.
Description
Optional
Type some descriptive information for the host address.
Valid characters for the description: letters, digits, blank spaces, colons (:),
underscores (_), commas (,), periods (.), exclamatory marks (!), and hyphens
(-), where underscores can’t appear at the beginning or end of the name.
IP Address
Required
Specify IP addresses for the host address.
• Input an IP address and click Add next to the text box to add the IP address
to the IP addresses list. You can also select an IP address on the list and click
Delete to remove the IP address from the list.
• The IP addresses must be in dotted decimal notation.
To delete host addresses, select them and click Delete on the host address management page.
Return to
IP address management functions .
Address ranges
To view address ranges:
1. From the navigation tree of the firewall management component, select IP Addresses under
Security Policy Management.