Managing operation logs, Configuration guide, Figure 29 – H3C Technologies H3C SecCenter Firewall Manager User Manual
Page 38: Ribed in, Table 34
32
Figure 29 Add an operator
Table 34 Configuration items
Item
Description
Login Name
Type a name for the operator, a string of up to 40 characters.
Login Password
Specify a password for the operator to use at login.
The password must comprise 6 to 20 alphanumeric characters, and its strength
must meet the password strength requirements of the device.
Confirm Password
Type the password again, which must be the same as that for Login Password. If
the two are not the same, an error message will appear, telling you that they must
be identical.
Role
Select an operation level for the operator.
Manage Device Group
Specify which device groups the operator can manage.
Authentication Mode
Select an authentication mode for the operator.
Available authentication modes include local authentication and LDAP
authentication. If you select LDAP authentication, you must also select an LDAP
server.
Managing operation logs
Configuration guide
Operation logs reflect what operators have done after login. A super administrator can view operations
logs, query logs by different conditions, and delete logs.
From the navigation tree of the system management component, select Operation Logs under Operator
Management. The operation log management page appears, as shown in
.
describes the operation log query options. You can use any combination of the options to query for the
logs of interest.