H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 8)

2
Installation and uninstallation
Installing the firewall manager
The software and hardware requirements of the Firewall Manager are as follows:
• Hardware: P4 2.0 CPU or above, 1.5G memory or more, 80G disk or more.
• Operating system: Windows 2003 Server (recommended) or Windows XP, installed with the
up-to-date patches.
• Browser: IE 6.0 or above.
To install H3C SecCenter Firewall Manager, you only need to run the executable file install.exe, which is
under the installation directory, and click Next as prompted.
CAUTION:
After finishing installation, you must restart the operating system.
Registering the firewall manager
In the address bar of the browser, enter http://localhost/ to open the login page. The default login
username and password are admin and admin1 respectively.
CAUTION:
The last character of the password is digit 1.
When you log in to the Firewall Manager for the first time, you will see the license information page and
such a message: You haven’t registered. Please register to use the system normally. You can enter your
user information, obtain a formal license, and register your license by following this procedure:
1. From the navigation tree, select License Application under License Management to enter the user
information page, as shown in
Figure 1 .
Figure 1 Input user information