Services, Configuration guide, Table 71 – H3C Technologies H3C SecCenter Firewall Manager User Manual
Page 79
73
Table 71 Configuration items
Item Description
Name
Required
Type a name for the time range.
The name can't be null and can't contain any of these characters: ? < > \" % ' & #.
Time Range
Required
Specify the time periods during which a security policy that references the time
range take effect.
A time period can be periodic or absolute:
•
Periodic—Select the start time and end time for the periodic time period, and then
select the days of the week during which the time period applies. By default, the
periodic time period is from 0:0 to 24:0 every day.
•
Absolute—Select the start time and end time for the absolute time period. By
default, the absolute time period is a 24-hour period starting from the full hour of
the current time. An absolute time range takes effect only once.
Time range management functions
Services
Configuration guide
From the navigation tree of the firewall management component, select Services under Security Policy
Management. The predefined service management page appears, as shown in
.
describes the functions of the tabs.
Figure 76 Service management page