H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 129)

123
Figure 126 Add a device to the system management component
3. Select the Firewall Management component, and then select Device Management under Device
Management from the navigation tree to enter the device management page.
4. Click Add to enter the page for adding devices to the firewall management component, as shown
in
Figure 127 .
Figure 127 Add a device to the firewall management component
After you configure the devices and add the firewall devices to the H3C SecCenter, the SecCenter system
is configured basically and ready for service operations.
CAUTION:
For devices that SecCenter has discovered automatically, you do not need to add them manually.
5. On the web interface of each firewall device, set the IP address of the syslog server in the notify
action to that of the SecCenter server, and port number to 30514.
CAUTION:
The SecCenter Firewall Manager uses port 30514 to receive syslogs.