H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 87)

81
Figure 84 Add an address range
Table 82 Configuration items
Item Description
Name
Required
Type a name for the address range.
Valid characters for the name: letters, digits, underscores (_), periods (.),
slashes (/), and hyphens (-), where underscores can’t appear at the beginning
or end of the name.
IMPORTANT:
The name must be unique in the system. It cannot be the same as the name of an
existing host address, address range, subnet address, or IP address group.
Description
Optional
Type some descriptive information for the address range.
Valid characters for the description: letters, digits, blank spaces, colons (:),
underscores (_), commas (,), periods (.), exclamatory marks (!), and hyphens
(-), where underscores can’t appear at the beginning or end of the name.
Address Range
Required
Set the start IP address and end IP address of the address range.
The IP addresses must be in dotted decimal notation.
Excluded Addresses
Required
Specify the IP addresses to be excluded from the address range.
• Input an IP address and click Add next to the text box to add the IP address
to the excluded IP addresses list. You can also select an IP address on the list
and click Delete to remove the IP address from the list.
• The IP addresses must be in dotted decimal notation.
To delete address ranges, select them and click Delete on the address range management page.