H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 100)

94
Table 94 Fields of the policy’s rule list
Filed Description
ID
ID of the interzone rule.
When you create an interzone rule, the system automatically assigns an ID to the
rule according to the number of existing rules for the source zone and destination
zone pair, starting from 0. For example, the first rule created for the source zone
Trust and the destination zone DMZ is numbered 0, the second rule created for the
same source zone and destination zone pair is numbered 1.
Src Zone Source zone of the interzone rule.
Dest Zone Destination zone of the interzone rule.
Src IP Source IP address of the interzone rule.
Dest IP Destination IP address of the interzone rule.
Service All services of the interzone rule.
Time Range Time range during which the interzone rule takes effect.
Description Descriptive information about the interzone rule.
Action Filtering action of the interzone rule.
Status Whether the interzone rule is enabled or disabled.
Logging Whether logging is enabled for the interzone rule.
Sort
Click the icon to change the position of the interzone rule among the rules for
the same source zone and destination zone. See “ Sorting interzone rules .”
Details/Modify Click the icon to enter the interzone rule list and modify the interzone rule.
To add more interzone rules to the policy:
1. Click Add on the policy’s rule management page.
A page as shown in
Figure 94 appears, showing all rules that have been created for the same
source zone and destination zone pair but are not in the policy.
2. Select the rules you want to add to the policy.
3. Click Add.
You cannot add rules to or remove rules from policies that are managed by other administrators.