H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 45)

39
Item Description
Destination IP
Optional
Specify the destination IP addresses that you want the system to collect statistics on.
Source Port
Optional
Specify the source ports that you want the system to collect statistics on.
Destination Port
Optional
Specify the destination ports that you want the system to collect statistics on.
Protocol
Optional
Select the protocols that you want the system to collect statistics on.
Event
Optional
Specify the events that you want the system to collect statistics on.
CAUTION:
The configuration items given in the previous table can be used to define query conditions. For example,
you can enter source IP address 1.1.1.1 to search for data with the source IP address being 1.1.1.1, or
enter source IP address 1.1.1.1 and select the Invert selection check box to search for data whose source
IP address is not 1.1.1.1.
Return to Filter management functions .
Managing LDAP servers
This function allows you to configure LDAP servers. Then, you can select LDAP authentication to verify the
operator’s username and password when they log in to the SecCenter system.
Configuration guide
From the navigation tree of the system management component, select LDAP Server Management under
System Config. The LDAP server management page appears, displaying all LDAP servers.
Figure 37 LDAP server management page
Table 43 LDAP server management functions
Function Description
LDAP server list Allows you to view details about LDAP servers and modify LDAP server settings.
Adding an LDAP server Allows you to add an LDAP server.
Deleting LDAP servers Allows you to delete one or more LDAP servers from the system.
LDAP server list
The LDAP server list is on the LDAP server management page, as shown in Figure 37 .