H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 82)

76
Item Description
Protocol
Required
Configure the protocol information for the user-define service.
Select TCP, UDP, ICMP or Others.
• If you select TCP, specify the source port and the destination port, in the
range 0 to 65535.
• If you select UDP, specify the source port and the destination port, in the
range 0 to 65535.
• If you select ICMP, specify the protocol type and the code, in the range 0 to
255.
• If you select Others, type the protocol number, in the range 0 to 255 except
1, 6, and 17.
To delete user-defined services, select them and click Delete on the user-defined service management
page.
Return to
Service management functions .
Service groups
From the navigation tree of the firewall management component, select Services under Security Policy
Management. Click the Service Groups tab to enter the service group management page, as shown
in Figure 79 . Table 76 describes the fields of the service group list.
Figure 79 Service group management page
Table 76 Fields of the service group list
Field Description
Name Name of the service group.
Member Services in the service group.
Description Descriptive information about the service group.
Referenced Whether the service group is referenced or not.
Operation Click the icon to modify the service group.
To add a service group:
1. Click Add on the service group management page to enter the Add Service Group page.
2. Configure the service group as described in Table 77 .
3. Click Add.