H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 110)

104
2. Click Add to enter the page for adding a packet inspection profile, as shown in Figure 105 .
3. Configure the settings.
4. Click OK.
Figure 105 Add a packet inspection profile
Return to Packet inspection management functions .
Deploying a packet inspection profile
1. From the navigation tree of the firewall management component, select Packet Inspection under
Intrusion Detection to enter the packet inspection management list page, as shown in Figure 104 .
2. Click the icon of a packet inspection profile to enter the profile deployment page, as shown
in Figure 106 .
3. Select virtual devices and click Apply. You can deploy one profile to multiple devices. To remove
the profile from devices, unselect the devices and click Apply.
The deployment result is shown on the packet inspection profile list as shown in Figure 104 . To redeploy
a packet inspection profile that fails the deployment, select the profile, and click Redeploy.
NOTE:
If you have already deployed a packet inspection profile, and do not make any change on the packet
inspection profile deployment page, no deployment is performed after you click Apply.