H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 41)

35
Figure 32 System parameter setting
Configuring management ports
This module allows you to specify the SecCenter background ports for receiving various logs from
devices.
Configuration guide
1. From the navigation tree of the system management component, select Management Ports under
System Config.
The management ports configuration page appears, as shown in
Figure 33 .
2. Configure the port numbers as described in Table 38 .
3. Click Apply.
Figure 33 Management port configuration page
Table 38 Configuration items
Item Description
NAT Logs Port
Required
Type the port for receiving NAT logs.
The port number must be in the range from 1 to 65534.
Syslog Port
Required
Type the port for receiving syslogs.
The port number must be in the range from 1 to 65534.