H3C Technologies H3C SecCenter Firewall Manager - Manual (Page 18)

12
Item Description
Add Device
Click this button to add a device to which you want to deploy a software
version. You can add multiple devices.
You can click the icon of a device to remove it from the list.
Select a location from the Device Storage Path drop-down list to specify where
the software should be saved on the device. Generally, the root directory of the
CF card is selected.
Deploy Software Version
Required
Click the link in this column to select the software version to be deployed.
Deployment Sequence
Required
Select a deployment mode to deploy the software to the devices in parallel
(Parallel) or one by one (Serial).
When the deployment sequence is serial, the icons are configurable for
adjusting the sequence.
Error Handling
Required when the deployment mode is Serial.
Specify the error handling scheme to be used when a deployment error occurs.
Deployment Policy
Required
Select the actions to be taken after deploying the software selected in the Deploy
Software Version column.
• Set the currently running software as the backup startup
software—Specifies secpath1000fe-cmw520-b5002.bin as the main startup
software and the current running software as the backup startup software.
• Delete software that is currently running—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software and
deletes the current running software from the device.
• Delete startup software that is currently backup—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software, deletes the
backup startup software from the device, and leaves the current running
software on the device.
• Reboot the device immediately after deploying—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software, leaves all
software files stored on the device, and reboots the device. After the device
reboots, secpath1000fe-cmw520-b5002.bin is the current running software
of the device.
Deployment Time Specify the execution time of the deployment task.
NOTE:
You must select a software version for the Deploy Software Version field before deploying software to
devices.
Return to Device software management functions .
3. Backing up the software of devices
a. On the device software management page, select devices and then click Backup Device
Software to back up the software of the selected devices.
b. The Import from Device page appears with the operation results, as shown in Figure 10 .
Table 8 describes the fields of the software backup result list.