Verifying the configuration – H3C Technologies H3C S6300 Series Switches User Manual
Page 372

357
# Save the current configuration to the root directory of the storage medium, and specify it as the startup
configuration file.
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to device successfully.
[Sysname] quit
# Delete the startup configuration file in binary format.
Delete flash:/startup.mdb?[Y/N]:y
Deleting file flash:/startup.mdb...Done.
# Reboot the device.
Verifying the configuration
After the device reboots, enter the username test and password 12345zxcvb!@#$%ZXCVB to enter
non-FIPS mode.
Press ENTER to get started.
login: test
Password:
Last successfully login time:…
…
# Display the current FIPS mode state.
FIPS mode is disabled.