H3C Technologies H3C S6300 Series Switches - Manual (Page 306)

291
e. Select Connection > SSH > Auth from the navigation tree.
The window shown in
Figure 91 appears.
f. Click Browse… to bring up the file selection window, navigate to the private key file
(private.ppk in this example), and click OK.
Figure 91 Specifying the private key file
g. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 92 , you can log in to Switch B through the Stelnet client that runs on Switch A and are
assigned the user role network-admin for configuration management. Switch B acts as the Stelnet server
and uses password authentication. The username and password of the client are saved on Switch B.
Figure 92 Network diagram