H3C Technologies H3C S6300 Series Switches - Manual (Page 176)

161
[Device-Ten-GigabitEthernet1/0/1] port-security port-mode autolearn
Cannot configure secure MAC addresses
Symptom
Cannot configure secure MAC addresses.
Analysis
No secure MAC address can be configured on a port operating in a port security mode other than
autoLearn.
Solution
Set the port security mode to autoLearn.
[Device-Ten-GigabitEthernet1/0/1] undo port-security port-mode
[Device-Ten-GigabitEthernet1/0/1] port-security max-mac-count 64
[Device-Ten-GigabitEthernet1/0/1] port-security port-mode autolearn
[Device-Ten-GigabitEthernet1/0/1] port-security mac-address security 1-1-2 vlan 1