H3C Technologies H3C S6300 Series Switches - Manual (Page 300)

285
To establish a connection to the Stelnet server:
a. Launch PuTTY.exe to enter the interface shown in Figure 84 .
b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server.
Figure 84 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username and
password. After entering the username (client001 in this example) and password (aabbcc in this
example), you can enter the CLI of the server.