H3C Technologies H3C S6300 Series Switches User Manual
Page 292
277
Task Command
Remarks
Establish a connection
to an Stelnet server.
•
In non-FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ identity-key { dsa |
ecdsa | rsa } | prefer-compress zlib |
prefer-ctos-cipher { 3des | aes128 | aes256 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In FIPS mode, establish a connection to an IPv4
Stelnet server:
ssh2 server [ port-number ] [ identity-key { ecdsa |
rsa } | prefer-compress zlib | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex dh-group14 |
prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In non-FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ -i interface-type
interface-number ] [ identity-key { dsa | ecdsa |
rsa } | prefer-compress zlib | prefer- ctos-cipher
{ 3des | aes128 | aes256 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] *[ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
In FIPS mode, establish a connection to an IPv6
Stelnet server:
ssh2 ipv6 server [ port-number ] [ -i interface-type
interface-number ] [ identity-key { ecdsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.
The ecdsa keyword is
available in Release
2311P04 and later
versions.