H3C Technologies H3C S6300 Series Switches User Manual
Page 360
345
# Configure Ten-GigabitEthernet 1/0/4 and Ten-GigabitEthernet 1/0/6 as network ports.
[SwitchB] interface ten-gigabitethernet 1/0/4
[SwitchB-Ten-GigabitEthernet1/0/4] mac-forced-forwarding network-port
[SwitchB-Ten-GigabitEthernet1/0/4] quit
[SwitchB] interface ten-gigabitethernet 1/0/6
[SwitchB-Ten-GigabitEthernet1/0/6] mac-forced-forwarding network-port
4.
Enable STP on Switch C globally to make sure STP is enabled on interfaces.
[SwitchC] stp global enable
This manual is related to the following products: