Rrpp timers – H3C Technologies H3C S10500 Series Switches User Manual
Page 62

53
Type Description
Fast-Hello
The master node initiates Fast-Hello packets to fast detect the integrity of a ring in
a network.
Link-Down
The transit node, the edge node, or the assistant-edge node initiates Link-Down
packets to notify the master node of the disappearance of a ring in case of a link
failure.
Common-Flush-FDB
The master node initiates Common-Flush-FDB (FDB stands for Forwarding
Database) packets to instruct the transit nodes to update their own MAC entries
and ARP/ND entries when an RRPP ring transits to Disconnect state.
Complete-Flush-FDB
The master node initiates Complete-Flush-FDB packets to instruct the transit nodes
to update their own MAC entries and ARP/ND entries and release blocked ports
from being blocked temporarily when an RRPP ring transits to Health state.
Edge-Hello
The edge node initiates Edge-Hello packets to examine the SRPTs between the
edge node and the assistant-edge node.
Fast-Edge-Hello
The edge node initiates Fast-Edge-Hello packets to fast examine the SRPTs
between it and the assistant-edge node.
Major-Fault
The assistant-edge node initiates Major-Fault packets to notify the edge node of
SRPT failure when an SRPT between edge node and assistant-edge node is torn
down.
NOTE:
RRPPDUs of subrings are transmitted as data packets in the primary ring, and RRPPDUs of the primary ring
can only be transmitted within the primary ring.
RRPP timers
When RRPP checks the link state of an Ethernet ring, the master node sends Hello packets out the primary
port according to the Hello timer and determines whether its secondary port receives the Hello packets
based on the Fail timer.
•
The Hello timer specifies the interval at which the master node sends Hello packets out the primary
port.
•
The Fail timer specifies the maximum delay between the master node sending Hello packets out the
primary port and the secondary port receiving the Hello packets from the primary port. If the
secondary port receives the Hello packets sent by the local master node before the Fail timer expires,
the overall ring is in the Health state. Otherwise, the ring transits into the Disconnect state.
•
The Fast-Hello timer specifies the interval at which the master node sends Fast-Hello packets out the
primary port.
•
The Fast-Fail timer specifies the maximum delay between the master node sending Fast-Hello
packets out the primary port and the secondary port receiving the Fast-Hello packets from the
primary port. If the secondary port receives the Fast-Hello packets sent by the local master node
before the Fast-Fail timer expires, the entire ring is in the Health state. Otherwise, the ring transits
into the Disconnect state.
- H3C S5800 Series Switches H3C S5820X Series Switches H3C WX3000E Series Wireless Switches H3C SecPath F1000-E H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS