H3C Technologies H3C S10500 Series Switches - Manual (Page 23)

14
Configuring errored frame period event detection
Follow these steps to configure errored frame period event detection:
To do… Use the command… Remarks
Enter system view system-view —
Configure the errored frame
period event detection
period
oam errored-frame-period period
period-value
Optional
1000 milliseconds by default.
Configure the errored frame
period event triggering
threshold
oam errored-frame-period threshold
threshold-value Optional
1 by default.
Configuring errored frame seconds event detection
Follow these steps to configure errored frame seconds event detection:
To do… Use the command… Remarks
Enter system view system-view —
Configure the errored frame
seconds event detection
interval
oam errored-frame-seconds period
period-value Optional
60 second by default.
Configure the errored frame
seconds event triggering
threshold
oam errored-frame-seconds threshold
threshold-value Optional
1 by default.
CAUTION:
Make sure the errored frame seconds triggering threshold is less than the errored frame seconds detection
interval. Otherwise, no errored frame seconds event can be generated.
Displaying and maintaining Ethernet OAM
configuration
To do… Use the command… Remarks
Display global Ethernet OAM
configuration display oam configuration [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display the statistics on critical
events after an Ethernet OAM
connection is established
display oam critical-event [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the statistics on Ethernet
OAM link error events after an
Ethernet OAM connection is
established
display oam link-event { local | remote }
[ interface interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the information about an
Ethernet OAM connection
display oam { local | remote } [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view