Configuring cfd functions, Configuration prerequisites, Configuring cc on meps – H3C Technologies H3C S10500 Series Switches User Manual
Page 33: Configuring cfd

24
To do...
Use the command...
Remarks
Enter system view
system-view
—
Configure the rules for generating
MIPs
cfd mip-rule { explicit | default }
service-instance instance-id
Required
By default, neither MIPs nor the
rules for generating MIPs are
configured.
CAUTION:
Any of the following actions or cases can cause MIPs to be created or deleted after you have configured
the cfd mip-rule command:
•
Enabling CFD (use the cfd enable command)
•
Creating or deleting the MEPs on a port
•
Changes occur to the VLAN attribute of a port
•
The rule specified in the cfd mip-rule command changes
Configuring CFD functions
Configuration prerequisites
Complete basic CFD settings.
Configuring CC on MEPs
After the CC function is configured, MEPs can send CCM frames to one another to check the connectivity
between them.
You must configure CC before configuring other CFD functions.
Follow these steps to configure CC on a MEP:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Configure the interval field value in
the CCM messages sent by MEPs
cfd cc interval interval-value
service-instance instance-id
Optional
By default, the interval field value is
4.
Enter Layer 2 Ethernet interface
view
interface interface-type
interface-number
—
Enable CCM sending on a MEP
cfd cc service-instance instance-id
mep mep-id enable
Required
Disabled by default.
CAUTION:
On different devices, the MEPs belonging to the same MD and MA should be configured with the same
CCM transmission interval.
- H3C S5800 Series Switches H3C S5820X Series Switches H3C WX3000E Series Wireless Switches H3C SecPath F1000-E H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS