H3C Technologies H3C S10500 Series Switches - Manual (Page 45)

36
Table 15 Procedures for processing different types of DLDP packets received
Packet type Processing procedure
If the corresponding neighbor entry does not exist, creates the
neighbor entry, triggers the Entry timer, and transits to Probe
state.
Advertisement
packet with RSY tag
Retrieves the
neighbor
information
If the corresponding neighbor entry already exists, resets the
Entry timer and transits to Probe state.
If the corresponding neighbor entry does not exist, creates the
neighbor entry, triggers the Entry timer, and transits to Probe
state.
Normal
Advertisement
packet Retrieves the
neighbor
information
If the corresponding neighbor entry already exists, resets the
Entry timer.
If yes, performs no processing.
Flush packet
Determines whether
or not the local port
is in Disable state
If not, removes the corresponding neighbor entry (if any).
If the corresponding neighbor entry does not exist, creates the
neighbor entry, transits to Probe state, and returns Echo packets.
Probe packet
Retrieves the
neighbor
information
If the corresponding neighbor entry already exists, resets the
Entry timer and returns Echo packets.
If the corresponding neighbor entry does not exist, creates the
neighbor entry, triggers the Entry timer, and transits to Probe
state.
If the neighbor information it carries conflicts
with the corresponding locally maintained
neighbor entry, drops the packet.
Echo packet
Retrieves the
neighbor
information
The
correspondin
g neighbor
entry already
exists
Otherwise, sets the flag of the neighbor as
two-way connected. In addition, if the flags of
all the neighbors are two-way connected, the
device transits from Probe state to
Advertisement state and disables the Echo
timer.
If yes, performs no processing.
Disable packet
Checks whether the
local port is in
Disable state
If not, sets the state of the corresponding neighbor to
unidirectional, and then checks the state of other neighbors. If
all the neighbors are unidirectional, transitions the local port to
the Disable state. If the state of some neighbors is unknown,
waits until the state of these neighbors is determined. If
bidirectional neighbors are present, removes all unidirectional
neighbors.
If not, performs no processing.
RecoverProbe
packet
Checks whether the
local port is in
Disable or
Advertisement state
If yes, returns RecoverEcho packets.
If not, performs no processing.
RecoverEcho packet
Checks whether the
local port is in
Disable state
If yes, the local port transits to Active state if the neighbor
information the packet carries is consistent with the local port
information.