Delta Electronics Extension Digital I/O Module DOP-EXIO14RAE - Manual (Page 56)

Chapter 5 Internal Memory Address|DOP-EXIO Series
Revision March, 2008, Doc. Name: 2007PDD23000014 5-1
Chapter 5 Internal Memory Address
After enabling the DOP-EXIO function, all the HMI elements can use DOP-EXIO series as
internal memory addresses. The usage is the same as the usage of HMI internal memory $0 ~
$65535. Some of the internal memory addresses are “For latched”. For more introductions
and the setting range of each device, please refer to Appendix A in this manual.
When the function for DOP-EXIO series is activated, the devices for DOP-EXIO series will
appear in the “Device Type” drop-down menu shown in the “Internal Memory” selection.Some
of the devices have special definitions and will be set or referred within some specific
instructions. For more descriptions of the devices and instructions for DOP-EXIO series,
please refer to Appendixes in this manual.