Delta Electronics Extension Digital I/O Module DOP-EXIO14RAE - Manual (Page 30)

Chapter 3 Creating and Editing Programs|DOP-EXIO Series
Revision March, 2008, Doc. Name: 2007PDD23000014 3-9
2. For example, select the device name “Y” and device number “1” from the
drop-down menu or type in the device name “Y” and device number “1” by using
the keyboard. Then, press Enter key on the keyboard or click the “OK” button to
save the settings.
*Footnote 3: Input Application Instruction
1. Click the icon on the toolbar or press the F6 function key on the keyboard
and the “Application Instructions” dialog box will appear.
2. First, choose one selection from the “Function List” drop-down menu (including
all application instructions and output commands, etc.). Then, select the “API
Number” and “Application Instruction”. The user can also type in the desired
instruction, e.g. MOV in the "Application Instruction" drop-down menu directly.
After all settings are completed, press Enter key on the keyboard.
3. Select “Transfer and Compare” from the “Function List” drop-down menu and
type in “MOV” in the field of "Application Instruction" directly (or choose “MOV”
instruction from the “Application Instruction” drop-down menu). Then, press Enter
key on the keyboard, and the user can see the figure below on the screen.