Delta Electronics Extension Digital I/O Module DOP-EXIO14RAE - Manual (Page 46)

Chapter 3 Creating and Editing Programs|DOP-EXIO Series
Revision March, 2008, Doc. Name: 2007PDD23000014 3-25
2. The Comment dialog box will appear and the user can edit comments for the desired
device that the user chooses, e.g. M0 (If the chose device is the special M and D device,
the user will see the preset comments shown in the Comment dialog box). After the device
comments editing is completed, press “Enter” key on the keyboard or click the “OK” button
by using the mouse.
3. If the user wants to display or hide device comments in the Ladder Diagram Mode, click
the icon on the toolbar or choose “Show Comments(M)” from “View(V)” menu.
Method 2:
1. Enter the Ladder Diagram Mode (or Instruction Mode). Move the editing block on the
desired device (such as T64). Right click the mouse and then the following pop-up menu
will appear on the screen.
In Ladder Diagram Mode In Instruction Mode
2. Choose “Edit Device Comments” from the pop-up menu, and the Comment dialog box will
appear (see the figure below). Select the desired device, e.g. T64 and enter the comments
for device T64. After the comments editing is completed, press “Enter” key on the
keyboard or click the “OK” button by using the mouse.