Rena MACH X (Digital Color Label Printer) - Manual (Page 66)

SECTION 3
OPERATING THE PRINTER
60
Network Configuration Menu
Permits you to view, enter or change settings to connect the Printer to your
network.
See “Connecting the printer via Network (Ethernet Port)” for more details.
Network Connection Set Up:
1. The Printer is still connected to the computer via the USB cable.
To connect the Printer to a network, open the Toolbox. On the User
Interface page, click “Network Config.”
2. The “Network Configuration” page opens. Your IT person can
choose the Network Settings to enter the correct settings for your
network.
3. Connect Ethernet cable to Network Port on Rear Panel of Printer.
See “Connecting the printer via Network (Ethernet Port)” for more details.