Rena MACH X (Digital Color Label Printer) - Manual (Page 119)

APPENDICES
113
Appendix B – Printer Specifications
PRINT RESOLUTION
Best: 1600 x 1600 DPI
Normal: 1600 x 800 DPI
PRINT SPEED
Best Quality Mode: 6" (15 cm)/second; 30 ft/min
Normal Quality Mode: 12" (30 cm)/second; 60 ft/min
UNWINDER/WINDER
SPEED
0-125 RPM
MAX. PRINT AREA 8.5" (215.9 mm) W x Continuous Length
MEDIA TYPES Roll or Fanfold (Label, Tags, Paper)
LABEL SIZE
Minimum: 2" W x `1” L (50.8 mm x 25.4 mm), on continuous media
Maximum: 8.5"W x 30” L (215.9 mm x 762 mm), on continuous media
MEDIA THICKNESS
Minimum: 3 points (0.004”, 0.1 mm)
Maximum: 12 points, (0.012”, 0.3 mm)
MIN. LABEL GAP
(Space between Labels) No Bleed: 0.125” (3 mm) printing within boundary of label
Full Bleed: 0.197” (5 mm) printing slightly past edges of label
ROLL SIZE
(Unwinder/Winder)
Roll to Cut
Roll Width:
2” (50 mm) min. 9"(228.6 mm) max
Roll Diameter: 10"(254 mm) max
Roll to Roll
Roll Width:
2” (50 mm) min. 8.5"(215.9 mm) max
Roll Diameter: 10"(254 mm) max
ROLL CORE SIZES
UNWINDER Hub: 1.5" (38 mm) & 3" (76.2 mm) Diameter
WINDER Hub: 3" (76.2 mm) Diameter
Tip: It is recommended to purchase supplies that are manufactured using
soft-release tape; to attach media to roll core. If not media may not release
from core which will stop/stall the media when it reaches the end of the roll.
MEDIA SENSING
Diecut (label gap)
Blackmark (tick-mark)
Notch (hole)
NOTE: It is also possible to print on continuous media that does not have a
“label gap”, “notch” or “tick-mark”.
INK Water-based ink. 5 individual 250 ml ink tanks (CMYKK)
PRINT CARTRIDGE One Memjet ® Printhead
INTERFACE USB and Ethernet
ELECTRICAL 110 VAC, 50/60 Hz (220-240 VAC, 50/60 Hz available)
DIMENSIONS
PRINTER: 21" W x 21" L x 11" H (53 cm x 53 cm x 27 cm)
UNWINDER/WINDER: 17" L x 9" W x 11" H (43 cm x 22 cm x 27 cm)
PRINTER WEIGHT 70 lbs. (31.8 kg)
All Specifications Subject To Change Without Notice