Rena MACH X (Digital Color Label Printer) - Manual (Page 117)

APPENDICES
111
Page Setup for Oversize
When using the Oversize option, Resizing (located in the Layout Tab of the Driver) needs to be set to
"Original Size".
Page Setup for Oversize Option
Impact of Using Oversize
Selecting Oversize extends the Custom Sizes dimensions beyond that of the actual media being printed on.
Since this size extension is equal in both X- and Y- axes, there is no distortion of the image. Instead,
choosing Oversize opens up more of the image for printing, so that it can print beyond the size of the
physical media. However, the original image also needs to be created as oversized, not the size of the
physical media; otherwise, there is likely to be a white border between the image and the media.
Prerequisites for Oversize
To make Oversize an applicable option:
• The original image needs to be greater in size than the size of the actual media. The image needs
to be the same size as the custom media size selected on the Custom Sizes window, corresponding
to the additional amount set as the default in the Driver.
Oversize Example: Measurements and Relationships