QuickLabel 482 Pronto! - Manual (Page 68)

5-18 Configuration
The printer can be given a name on the top line of the tree structure. This
name does not have a functional meaning. Its sole purpose is to allow the
operator to more easily differentiate between the printers on a network.
The following parameters for the Ethernet interface can only be accessed via
the printer website:
Note: Information is not updated automatically while the "Setup" tab is open.
Updating occurs when the tab is changed or by clicking the Update button.
Parameter Meaning Default
SMTP server E-mails can be sent to selected addresses
when certain status and error messages are
generated. To activate:
• Set parameter to "On".
• Enter IP address of the SMTP server.
• Enter a valid e-mail address for the
printer in the "From address" field.
More detailed information on sending e-
mails is found in System messages tab on
page 5-19.
Off
Raw-IP port Service for printing on the network (see
Ethernet interface on page 1-8).
• Select a predefined port address.
9100
LPD Activation of the network printing service
LPD (see Ethernet interface on page 1-8):
• Set parameter to "On".
• Enter “lp” as the queue name.
Off
LPD queue
name Activation of the LPD queue name lp
SOAP Activation of the protocol SOAP (Simple
Object Access Protocol) Off
SOAP password Password setting for SOAP Off