Aligning the guide axle, Aligning the guide axle -21 – QuickLabel 482 Pronto! User Manual
Page 111
Pronto! 482/486/682/863
8-21
Aligning the Guide Axle
Depend of the used printer the guide axle should be aligned so, that the label
strip is led horizontally from the printer to the rewinder.
1
Loosen the guide axle (1) by turning it counterclockwise.
2
Move it in the guide plate (2) up to the desired position.
3
Fasten the guide axle (1) by turning it clockwise.
This manual is related to the following products: