QuickLabel 482 Pronto! - Manual (Page 203)

Pronto! 482/486/682/863 12-7
Font list
1 Insert printable medium (labels, endless paper) which extends across the
entire printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer
ribbon with the maximum width.
3 Press the menu button.
4 Select Test > Font list menu.
5 Start printout with the ↵ button.
You can cancel the printout with the cancel button.
The parameters have the following meaning:
The Font list function prints the most important parameters of
the fonts available in the printer in tabular form. The table
contains both the original fonts in the printer and other fonts
loaded into the printer. The printout occurs using the heat level
and print speed specified in the Setup > Print param. menu.
Note: The printout occurs without taking the label gaps into consideration.
This is why endless media are most suitable for this purpose.
Column Meaning
No. ID number of the font required for programming
(command T).
Name Name with which the font is saved internally.
Font list
Pronto 486 - 10/09/2007 -15:08:36
Firmware V3.11 (Aug 9 2007) - #111070553751
No. Name Type Description
-1 _DEF1 Bitmap Default Font 12x12 dots
-2 _DEF2 Bitmap Default Font 16x16 dots
-3 _DEF3 Bitmap Default Font 16x32 dots
-4 OCR_A_I Bitmap OCR-A Size I
-5 OCR_B Bitmap OCR-B
3 BX000003 TrueType Swiss 721
4 BX000005 TrueType Swiss 721 Bold
596 BX000596 TrueType Monospace 821