Adapting the stacker to the media size, Adapting the stacker to the media size -7 – QuickLabel 482 Pronto! User Manual
Page 175
Pronto! 482/486/682/863
10-7
Adapting the Stacker to the Media Size
Adjusting the Side Plates
1
Loosen screws (2).
2
Adjust the side plates (4) to the media width using the scale (1). Use the
edges (3) of the side plates as pointers.
3
Tighten screws (2).
Warning: Equip the stacker only with a table designated for the media to be
used and the matching safety covers. With inappropriate tables and safety
covers the reliability and machinery safety cannot be guaranteed.
This manual is related to the following products: