Mounting, Mounting -59 – QuickLabel 482 Pronto! User Manual
Page 149
Pronto! 482/486/682/863
8-59
Mounting
•
Prepare the installation point for the external operating panel as shown in
the drilling template. Dimensions are in millimeters.
•
Fix the external operating panel with 2 screws (DIN7984-M4x10).
Dimensions are in millimeters.
•
Connect the delivered cable at the 9-pin SUB-D plug of the panel and at
one of the USB interfaces (6) of the printer. The connection may be made
while the printer is switched on.
Directly after plug-in the external operating panel is ready.
This manual is related to the following products: