Explanation of the signals, Explanation of the signals -52 – QuickLabel 482 Pronto! User Manual
Page 142
8-52
Accessories
Explanation of the Signals
•
XPSE - Pause
If the pause signal XPSE becomes active the printer will finish the current
printed label. Then the printer will pause the print job as long as the
Pin
Signal
Direction
System Function
1
XPSE
Input
Pause signal
2
XFEH
Input
External error
3
---
---
Do not use!
4
---
---
Do not use!
5
XEDG
Output
No existing print job
6
XDNB
Output
Printer is not ready
7
XEDST
Output
Print of a label has started
8
GND
Ground (0V)
9
RXPSE
(Input)
Pause (reverse line)
10
RXFEH
(Input)
External error (reverse line)
11
---
---
Do not use!
12
GND
Ground (0V)
13
---
---
Do not use!
14
RÜL
Output
Reverse line (for all output signals)
15
24P
(Output)
Operating voltage +24V, Si T 100mA
This manual is related to the following products: