QuickLabel 482 Pronto! - Manual (Page 232)

15-8 Memory media
You can prevent unauthorized deleting of memory cards by using a PIN (see
Security on page 5-12).
1 Insert original medium.
2 Press the menu button.
3 Select Memory card > Format card with the right and left arrow buttons.
4 Press the ↵ button.
A selection field with the selection No appears in the display.
5 Use the up and down buttons to select Yes.
6 Press the ↵ button.
7 If the function Format card is protected via a PIN, use the arrow buttons
to enter the code number and confirm with the
↵ button.
The deleting procedure starts.
8 Do not remove the medium from the printer during the deleting
procedure.
The memory volume of the medium is shown in the display as soon as
the deleting procedure is complete.
9 Press any button.
Printing file contents
The label files found on a memory medium consist of a sequence of printer
commands. You can print these command sequences in the form of text with
the ASCII dump (Card) function.
1 Insert printable medium (labels, endless paper) which extends across the
entire printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer
ribbon with the maximum width.
3 Insert a memory medium.
4 Press the menu button.
5 Select the ASCII dump (Card) function in the Memory card menu.
6 Press the
↵ button.
The index of the memory medium is shown in the display.