Back panel, Tradeswitch-led – Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants User Manual
Page 88

User module »DP-CON«
84 · Target and user modules
Back panel
The Transmission interface at the back panel of the user module provides additional
status LEDs. The LEDs have the following meaning:
TradeSwitch-LED
The optional TS-LED (order number A6100041) lights if the key-
board and mouse signals of a master console are accessing the user
module.
LED
Colour
Status
Meaning
Left
Yellow
Off
No connection to network.
Blinking
Network connection to an end device.
Right
Green
On
A user module is accessing the target module.
Blinking
No communication with matrix switch.
Flashing
Connection to matrix switch established.
No user module is accessing.
Flickering Keyboard and mouse inputs are forwarded by the accessing
user module.
The flickering is defined by the user’s entries.
Yellow
Flashing
A firmware update is carried out.
NOTE:
Keyboard and mouse signals can only access another user module or a tar-
get computer if you activated the TradeSwitch function for the matrix switch.
Micro In
Keyb./Mouse
Speaker
Generic
Main Power
Red. Power
DisplayPort Out
LED out
Mouse
Keyb.
Transmission
- DVICenter DP32 Target Modules and User Modules - Standard Variants DVICenter DP64 Target Modules and User Modules - Standard Variants DVICenter DP16 Target Modules and User Modules - Integrated USB DVICenter DP32 Target Modules and User Modules - Integrated USB DVICenter DP64 Target Modules and User Modules - Integrated USB