Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 85)

User module »DP-CON«
Target and user modules · 81
Installation
Connecting the console devices
Keyb.: Connect the PS/2 keyboard of the local console.
Mouse: Connect the PS/2 mouse of the local console.
Keyb./Mouse: Connect the USB keyboard and/or USB mouse of the local console.
Generic: By default ( Keyb./Mouse mode), you can use this interface to connect another
USB input device or supported displays or tablets.
Enable the Generic HID mode (see page 106 ff.) if you want to connect another USB
input device. In this mode, data of the USB input device remains unaltered when
transmitted to the active target module.
DisplayPort Out: Connect the monitor of the local console.
Micro In: Connect the optional microphone of the local console.
Speaker: Connect the optional speakers of the local console.
NOTE: Both keyboard and mouse signals can be transmitted to the computer using
the PS/2 or the USB interfaces.
NOTE: You can also combine PS/2 and USB devices, for example by connecting a
USB mouse and a PS/2 keyboard.
IMPORTANT: With enabled Generic HID mode, it is not possible to operate the OSD
with a keyboard connected to the Generic socket.
NOTE: Check the monitor's manual if the OSD provides a setting for the mode of
the DisplayPort input. If so, select the mode in which the image data is processed
according to the standard DisplayPort 1.1 .
Micro In Keyb./Mouse Speaker
Generic
Main Power
Red. Power DisplayPort Out
LED out Mouse
Keyb. Transmission