Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 100)

User module »DVI-CON-12V«
96 · Target and user modules
Installation
Connecting the console devices
Keyb.: Connect the PS/2 keyboard of the local console.
Mouse: Connect the PS/2 mouse of the local console.
Keyb./Mouse: Connect the USB keyboard and/or USB mouse of the local console.
DVI/VGA Out: Connect the monitor of the local console.
Micro In: Connect the optional microphone of the local console.
Speaker: Connect the optional speakers of the local console.
Connection to the matrix switch
Transmission: Use a category 5e (or better) twisted pair cable to connect the Transmis-
sion interface to a Dynamic Port (RJ45) of the matrix switch.
Power supply
Main Power: Connect the power cable to the power pack and a power outlet.
Red. Power: If required, connect the power cable of the optional power pack to this
interface. This provides a redundant power supply. Connect the power cable with
the power pack and a power outlet of a different power circuit.
LED Out: If you expanded the functional range of the matrix switch by purchasing the
TradeSwitch feature, connect the optional TS-LED-2 (order number A6100041) to this
interface.
NOTE: Both keyboard and mouse signals can be transmitted to the computer using
the PS/2 or the USB interfaces.
NOTE: You can also combine PS/2 and USB devices, for example by connecting a
USB mouse and a PS/2 keyboard.
NOTE: You can also connect the target module directly to a compatible user module.
Transmission
Mouse
Keyb. DVI/VGA Out Micro In Speaker Keyb./Mouse Red. Power
LED Out
Main Power