Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 59)

User module »DVI-CON-MC2«
Target and user modules · 55
Connection to the matrix switch
Transmission 1: Connect this interface to a Dynamic Port (RJ45) of the matrix switch.
Transmission 2: Connect this interface to another Dynamic Port (RJ45) of the matrix
switch.
Power supply
Main Power: Connect the supplied power cable.
Insert the cable’s Schuko plug in a power socket.
Red. Power: Connect the connection cable of a compatible power pack to provide the
user module with a second, redundant power supply.
Startup
Turn on the user module after its installation.
Use the Main Power power pack or a redundant power pack to establish the power
supply:
 Turn on the Main Power power pack.
 Use an optional power pack to supply the Red. Power socket with power.
NOTE: Use category 5e (or better) twisted pair cables to connect the devices.
NOTE: You can also connect the target module directly to a compatible target module.
Keyb./Mouse
Generic
Transmission 1 Micro In Red. Power DVI / VGA Out 1
LED out
Speaker
Mouse
Keyb. Transmission 2 DVI / VGA Out 2