Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 72)

User module »DVI-CON-Fiber«
68 · Target and user modules
User module »DVI-CON-Fiber«
With DVI-CON-Fibre user modules, you can use optical fibres to connect a console ( DVI
monitor, keyboard, mouse and audio devices) to the matrix switch ControlCenter-Dig-
ital
At the installed console, matrix switch users can access a target module to operate
the connected computer.
Package contents
 1 × User module DVI-CON-Fiber
 1 × Power cable
Required accessories
 1 × Compatible optical fibre cable to connect the user module to
the matrix switch
NOTE: The user modules con be connected only to an I/O card of the
CCD-I/O 16-Card-Fiber series.
Both, the user module and the I/O card are available as single-mode variants or as
multi-mode variants.
Make sure that the port at the user module, the Dynamic-Port at the IO card and the
optical fibres are compatible with each other.