Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 8)

Target module »DVI-CPU«
4 · Target and user modules
Installation
Connecting target computers
Keyb.: Use the purple plug of a Twin-PS/2 cable to connect the purple PS/2 socket
(keyboard) to this port.
Mouse: Use the green plug of a Twin-PS/2 cable to connect the green PS/2 socket
(mouse) of the computer to this port.
USB K/M: Use the USB device cable to connect one of the computer’s USB ports to this
port.
DVI-D CPU: Use the video cable to connect the digital video output of the computer to
this port.
Line In: Use an audio cable to connect the Line-Out interface of the computer to this port.
Line Out: Use an audio cable to connect the Line-In interface of the computer to this port.
Connection to the matrix switch
Trans: Use a category 5e (or better) twisted pair cable to connect this interface to one
of the Dynamic Port (RJ45) provided at the matrix switch.
NOTE: Both keyboard and mouse signals can be transmitted to the computer using
the PS/2 or the USB ports.
ADVICE: You can also connect the target module directly to a compatible user module.
Mouse Keyb. DVI-D CPU USB K/M