Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 17)

Target module »DVI-CPU-MC2«
Target and user modules · 13
Connection to the matrix switch
Trans.|Channel 1: Connect this interface to a Dynamic Port (RJ45) of the matrix
switch.
Trans.|Channel 2: Connect this interface to another Dynamic Port (RJ45) of the matrix
switch.
Power supply
Power In: Insert the power pack’s connection cable to this interface.
Start-up
Connect the power cable to the power pack and a power socket.
The target module starts as soon as it is supplied with power. During start-up, the
channels are automatically grouped (see below).
Automatic grouping of channels
When operating the target module for the first time, the matrix switch recognises the
main channel and the target module’s additional channel. The channels are automat-
ically added to a channel group.
The web application uses the following icons to mark the different types of channels:
Main channel: target module icon with » MC « lettering
Video channel: target module icon with blue spot
In the web application, the list of target modules provides separate entries for
grouped channels. The icon next to the module name shows that the module is
part of a channel group.
Click the icon to get information about the channel group.
NOTE: Only use category 5e (or better) twisted pair cables to connect the devices.
NOTE: You can also connect the target directly to a compatible user module.
NOTE: In addition to the data of the KVM main channel, a channel group transmits
up to seven additional video channels and/or one USB 2.0 or RS 232 channel.
NOTE: You can adjust any channel groups that were created automatically or
manually. More information about channel groups is given in the separate manu-
als of the matrix switch web applications.