Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 106)

User module »DVI-CON-Video«
102 · Target and user modules
Installation
Connecting the console devices
DVI/VGA Out: Connect the monitor/projector of the local console.
Micro In: Connect the optional microphone of the local console.
Speaker: Connect the optional speakers of the local console.
Connection to the matrix switch
Transmission: Use a category 5e (or better) twisted pair cable to connect the Transmis-
sion interface to a Dynamic Port (RJ45) of the matrix switch.
Power supply
Main Power: Connect the power cable to the power pack and a power outlet.
Red. Power: If required, connect the power cable of the optional power pack to this
interface. This provides a redundant power supply. Connect the power cable with
the power pack and a power outlet of a different power circuit.
LED Out: If you expanded the functional range of the matrix switch by purchasing the
TradeSwitch feature, connect the optional TS-LED-2 (order number A6100041) to this
interface.
NOTE: You can also connect the target module directly to a compatible user module.
Transmission DVI/VGA Out Micro In Speaker Red. Power
Main
P
ower
LED Out