Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 121)

Configuration
Target and user modules · 117
Enable/disable the startup without a keyboard
By default, user modules start without a keyboard. As an alternative, the user mod-
ule can interrupt startup by showing a message regarding the missing keyboard.
Once you connect a keyboard to the user module, the startup process continues.
How to enable/disable the startup of a user module without a keyboard:
1. Press the Alt+Num (default) hotkey to open the on-screen display.
2. Select Keyboard/Mouse and press Enter .
3. Select the Keyboard required entry and press F8 to select one of the following
options:
4. Press F2 to save your settings.
Activating or resetting a PS/2 mouse
Compared to USB mouses, PS/2 mouses do not support hot plug technology. You
can therefore insert the PS/2 plug during operation, but it may be possible that the
computer does not detect the input device.
In order to activate or reset the PS/2 mouse, the matrix system can be used to send
a special command to the computer connected to the target module.
How to start and use the Mouse utility function:
1. Press the
Alt+Num (default) hotkey to open the on-screen display.
2. Select Mouse utility and press Enter .
3. Select one of the following functions and press Enter :
no: User module can be started without a keyboard (default).
yes: User module can be started only when a keyboard is connected.
NOTE: Since the commands differ depending on the used mouse type and the
installed operating system, four different functions are provided.
Reset Mouse: Resets the PS/2 mouse interface of a Windows
computer
Enable mouse (for Unix): Activates the PS/2 mouse of a Linux computer
Enable Intelli: Activates the PS/2 wheel mouse of a Linux computer
Enable Intelli-Explorer: Activates the PS/2 wheel mouse with additional
keys of a Linux computer