Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 64)

User module »DVI-CON-MC4«
60 · Target and user modules
User module »DVI-CON-MC4«
With DVI-CON-MC4 user modules, you can connect a dual-monitor console (four DVI
monitors, keyboard, mouse and audio devices) to a digital matrix switch of the Con-
trolCenter-Digital or the DVICenter series.
At the installed console, matrix switch users can access a target module to operate
the connected computer.
When using the console to access a multi-monitor computer with four graphics out-
puts, the separate images of the graphics outputs are displayed on the console moni-
tors.
When accessing the system with a target module with only one graphics input, only
the first monitor shows an image.
Package contents
 1 × User module DVI-CON-MC4
 1 × Power cable
Required accessories
 4 × Category 5e (or better) twisted pair cables to connect the user module to
the matrix switch
NOTE: Connecting a multi-monitor computer with four video outputs requires four
target modules of the DVI-CPU series or two target modules of the DVI-CPU-MC2 series.
In the web application, you can add the target modules of the multi-monitor com-
puters to a channel groups More information about this topic is given in the chap-
ter Expanding the system through port grouping of the web application manual.